No products in the cart.
Optical/Coax DAC Extender Converter Over Cat Cable (300m)
The digital audio over Cat extender-convertor solution transmits digital optical and coax signals concurrently up to a distance of 300m@48kHz, 150m@96kHz or 100m@192kHZ. The receiver side DAC converts either of the digital ( coax/toslink optical) signals to a 2Ch analog stereo audio output. The receiver will power the transmitter over the CAT cable.
This is a fantastic plug and play solution for sending optical audio from an HDTV back to an amplifier, AVR or multiroom audio system which requires an analog stereo audio , coax or optical input signal.
EXC-DAE300-TX Transmitter
Input: 1x Optical (Toslink) & 1x Coaxial SPDIF RCA
Output: RJ45
Casing Dimensions (WxHxD): 69mm x 65mm x 24mm
Dimensions with connectors (WxHxD):69mm x 76mm x 24mm
Bitrate over distance :192kHz – 100m, 96kHz – 150m, 48kHz – 300m
Supported Audio Formats :LPCM,DTS, Dolby Digital and Dolby Digital Plus when used as a straight digital in/digital out extender
Sample rates :32 kHz, 44.1 kHz, 48 kHz, 96 kHz and 192 kHz up to 24-bit resolution
EXC-DAE300-RX Receiver
Input: RJ45
Output: 1x Optical (Toslink), 1x Coaxial SPDIF RCA,1x Analog Stereo 3.5mm Audio jack
Casing Dimensions (WxHxD): 69mm x 65mm x 24mm
Dimensions with connectors (WxHxD):69mm x 76mm x 24mm
Power Supply:Input: AC100 – 240V 50/60Hz Output: DC 5V/1A
Weight: 70g
Operating Temperature Range: 0 to +40°C (32 to +104°F)
Storage Temperature Range: -4°F to 140°F (-20°C to 60°C)
Operating Humidity Range: 20 to 90 % RH (no condensation)
**Specifications are subject to change without notice.
- 1x EXC-DAE300-RX Receiver
- 1x EXC-DAE300-TX Transmitter
- 2x Surface mounting brackets
- 1x5V/1A power supply
- 1x User manual
FEATURES
- Extend optical and coaxial digital audio signals up to distances of 300m over a single CAT cable
- Optical and coaxial digital signal can both be distributed at the same time
- Supports distances of up to 192kHz – 100m, 96kHz – 150m, 48kHz – 300m
- Active solution powered only at the receiver The transmitter receives power over the CAT cable.
- Built in DAC (Digital to Analog Converter) converts either optical or coaxial digital (selectable) to analog stereo left/right audio output(PCM only)
- Supports sample rates 32 kHz, 1 kHz, 48 kHz, 96 kHz and 192 kHz up to 24-bit resolution
- Supports LPCM, DTS, Dolby Digital and Dolby Digital Plus when used as a straight digital in/digital out extender
- Plug-and-play
- Small compact size
- Ultra-low jitter and high-fidelity design
