New

Optical/Analog Audio DAC Extender Converter Over Cat Cable (300m)

This Audio Extender can transmit digital optical/toslink and analog audio signals simultaneously up to a distance of 300m/990ft (48kHz), 150m/495ft (96kHz) or 100m/330ft (192kHz) over a single CAT5E/6 cable. The digital optical audio is directly passed from transmitter to receiver. The analog audio output on receiver is selectable from the digital optical or the analog audio signal from transmitter. The extender supports bi-directional PoC and can be powered from either the Transmitter or receiver side.

This is an incredible solution for sending optical toslink and analog audio from TV back to an amplifier, AVR or multi-room audio system which requires an analog stereo audio input signal.

 

 

 

SKU: PHD-EXC-DAE300X-KIT Categories: , Tags: , , , ,

EXC-DAE300-TX Transmitter

Input: 1x Optical (Toslink) & 1x Stereo RCA 1x Micro USB

Output: RJ45

Casing Dimensions (WxHxD):90mm x 72mm x 20mm

Weight:174g

Bitrate over distance :192kHz – 100m, 96kHz – 150m, 48kHz – 300m

Supported Audio Formats :Optical: All audio formats, including LPCM 2.0, LPCM 5.1, Dolby Digital 2/5.1CH Analog: PCM 2.0

Sample rates :32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 176.4 kHz and 192 kHz up to 24-bit resolution

Sample rates :32 kHz,

 

EXC-DAE300-RX Receiver

Input: RJ45,1x Micro USB

Output:1x Optical (Toslink) & 1x Stereo RCA 

Casing Dimensions (WxHxD):90mm x 72mm x 20mm

Weight: 174g

Power Supply:Input: AC100 – 240V 50/60Hz Output: DC 5V/1A

Power Consumption: 1.5W(Max)

 

Operating Temperature Range: 0 to +40°C (32 to +104°F)

Storage Temperature Range: -4°F to 140°F (-20°C to 60°C)

Operating Humidity Range: 20 to 90 % RH (no condensation)

**Specifications are subject to change without notice.

 

PHD-EXC-DAE300X-KIT Manual

  • 1x EXC-DAE300X-RX Receiver
  • 1x EXC-DAE300X-TX Transmitter
  • 1xUSB Cable (USB-A to Micro-USB port)
  • 1x User manual

FEATURES

  • Extend optical fiber and analog audio signals up to a distance of 300m/990ft (48kHz), 150m/495ft (96kHz) or 100m/330ft (192kHz) over a single CAT cable
  • Audio formats support: LPCM, DTS, Dolby Digital and Dolby Digital Plus Supports audio sample rates: 32kHz, 44.1kHz, 48kHz, 96kHz, 176.4kHz and 192kHz up to 24-bit resolution
  • Built-in DAC (Digital to Analog Converter), the analog audio output port can output digital audio or analog audio through the audio selection switch
  • Supports bi-directional POC
  • Plug-and-play
  • Small compact size
  • Ultra-low jitter and high-fidelity design